How to Upgrade the NVMe SSD in a Lenovo ThinkPad T14s

Upgrading the NVMe SSD on your Lenovo ThinkPad T14s Gen 1 (Intel) is a simple and rewarding process that can supercharge your laptop's storage and performance. This model supports an M.2 2280 NVMe SSD with a PCIe 3.0 x4 interface, compatible with drives up to 2TB. Here is a step-by-step guide to help you upgrade confidently:

What You Will Need

• A compatible M.2 2280 NVMe SSD
• Precision screwdrivers
• Anti-static wristband
• A backup of your data (optional but highly recommended

Step-by-Step Instructions

1. Prepare Your Laptop

• Back up all important data.
• Disable the built-in battery via the BIOS menu as shown in the video.

2. Remove the Bottom Panel

• Flip the laptop over and unscrew the base panel with a precision screwdriver.
• Carefully lift the panel starting from the edges to avoid damaging the clips.

3. Swap the SSD

• Locate the M.2 SSD slot inside.
• Remove the securing screw and slide out the old SSD at a slight angle.
• Insert the new SSD at a 30-degree angle, aligning the connector properly.
• Push it flat and secure it with the screw.

4. Reassemble the Laptop

• Reattach the bottom panel, ensuring all clips are properly engaged.
• Secure the screws firmly.

5. Verify the Upgrade

• Attach a USB-C power supply to re-enable the built-in battery.
• Power on the laptop and access ThinkPad diagnostics (press Enter and F10).
• Check that the new SSD is detected under storage and run a quick diagnostic test.

Benefits of the Upgrade

Enjoy your revamped ThinkPad T14s Gen 1! As you have seen in the video upgrade the NVMe SSD is straight-forward and easy.